Alun Reece receives Outstanding Contribution to the Composites Industry Award

Alun Reece receives Outstanding Contribution to the Composites Industry Award

On Wednesday 4 November 2026, Alun Reece, CEO and founder of Loop Technology, received the Outstanding Contribution to the Composites Industry Award at the prestigious Composites UK Industry Awards Dinner. The dinner was held at the National Motorcycle Museum in Birmingham, alongside the Advanced Engineering show at the NEC.

In his acceptance speech, Alun said that receiving the award was an honour and that it meant a great deal to him. He thanked the entire Loop Technology team, and singled out his wife, Samantha Reece, as being behind his contribution, thanking her for her unwavering support.

Alun Reece giving his acceptance speech at the Composites UK Industry Awards Dinner 2026

Loop Technology and FibreLINE

Alun founded Loop Technology in 1998. The company is now a global industrial automation specialist and part of the Loop Group, which has offices in Dorchester, Bristol and Sheffield, as well as Loop Technology US Inc. in Seattle and Loop Construction Technology. A defining part of Alun’s career has been the development of FibreLINE, Loop Technology’s automated system for the ultra-high-rate manufacture of large composite structures, including aerospace components such as wings and empennage.

Winners at the Composites UK Industry Awards Dinner 2026

What FibreLINE does

FibreLINE is a modular automation system for composite preforming. It automates the cutting, sequencing, picking, forming, placing, tacking and inspection of large plies of dry fibre or pre-preg. It is assembled from Loop Technology’s end effectors and related equipment, and can be configured for different part sizes and cell layouts.

FibreFORM is a pick-and-place end effector that uses high-flow vacuum grippers to pick large composite plies, form them into complex three-dimensional, double-curvature shapes, and place them into the mould without damaging the material. FibreLINE can layup plies of up to 2 metres wide and beyond 30 metres long, with a stated positional repeatability of less than ±2 mm. It is used on highly shaped parts such as wing skins, nacelles, fairings and wing tips.

FibreROLL uses interchangeable storage rollers to pick and place plies of up to 5 metres wide and 20 metres long. It is intended for tools with less complex geometry, including spars, fuselage sections, gently curving wing skins and wind turbine blades. Other elements of the system sort and sequence material, secure plies, inspect layup and trim preforms.

FibreLINE delivers material deposition rates beyond 200 kg per hour. Development trials of the Ultra High-Rate Composite Deposition system at the National Composites Centre (NCC) in Bristol, which includes FibreLINE end effectors, have achieved dry-fibre deposition rates in excess of 350 kg per hour. This is compared with typical automated fibre placement rates for large structures of around 50 kg per hour.

Alun Reece and Samantha Reece at the Composites UK Industry Awards Dinner 2026

From Belfast to the NCC and COMPASS

FibreLINE has been developed through a series of major aerospace programmes. The technology was first developed in Belfast for Bombardier in 2014.

It was later installed at the NCC in 2020 as the Ultra High-Rate Composite Deposition system, supplied by a consortium led by Loop Technology, with Güdel and Coriolis. The cell can process components of up to 20 m × 5 m × 1.5 m and has been used in the Airbus Wing of Tomorrow programme, including automatable plies for a third wing upper cover.

Most recently, FibreLINE has been installed at the University of Sheffield Advanced Manufacturing Research Centre’s (AMRC) Composites at Speed and Scale (COMPASS) facility, which opened on 16 July 2026. Loop Technology is a partner in the facility and the robotic systems integrator for the cell, as part of the Boeing-led Isothermic High-Rate Sustainable Structures (IHSS) project. The project aims to reduce the time taken to manufacture large composite aerostructure components from approximately 40 hours to four, and to demonstrate the process at technology readiness level 6.

The COMPASS installation comprises five Loop Technology end effectors (two FibreFORM systems, one FibreEYE inspection system, and two bespoke systems for part assembly and movement), integrated with five FANUC M-2000 Series robots and two 21.4-metre Zünd cutting tables that can cut an entire ply in a single operation.

The Loop Technology team at the Composites UK Industry Awards Dinner 2026

Applying the same approach more widely

Although FibreLINE has been developed primarily for large aerospace structures, the same automation principles (cutting, kitting, forming and placing large dry-fibre or pre-preg plies at high rate) can be applied to other composite manufacturing. Loop Technology has identified potential uses in wind energy, defence, automotive, marine and drone manufacture. The NCC has described its deposition system as a multi-sector capability, and the AMRC has said that work at COMPASS is also intended to support applications in defence, renewable energy, transport and urban air mobility. A more compact FibreLINE 2×1 configuration is available for smaller parts, completing the preforming process on a 2 m × 1 m tool.

uests at the Composites UK Industry Awards Dinner 2026
Guests at the Composites UK Industry Awards Dinner 2026

Recognition from across the industry

Matt Hardman, Global Head of Sales at Loop Technology, who nominated Alun for the award, said:

“Alun’s contribution goes far beyond the success of Loop Technology. He has spent his career pushing the boundaries of what is possible in automation and composite manufacturing, while bringing people and organisations together to make those ideas a reality. His vision, collaborative approach and determination have been instrumental in his success, but it is his integrity, professionalism and willingness to share his knowledge that make him such a valued figure within our community. I’m delighted to see his contribution recognised with this award.”

We would like to thank Composites UK for organising the awards dinner, Zünd UK for its support as headline sponsor, and Nicki Kay, Managing Director of Zünd UK, for delivering the keynote address. Congratulations to all of this year’s winners and nominees.

Matt Hardman at the Composites UK Industry Awards Dinner 2026